We managed to get Fedora Workstation 26 out the door this week which I am very happy about. One major thing that is fully functional now though and that I have been testing myself extensively is being able to easily install the NVidia binary driver. If you set up the repository from Negativo17 you should be able to go install the Nvidia driver either using dnf on the command line or by searching for NVidia in GNOME Software, and just install it without any further work thanks to all the effort we and NVidia have been putting into things like glvnd.
If you have a workstation with an NVidia card I would say that you have a fully functional system at this point without any hacks or file conflicts with Mesa.
For hybrid graphics laptops this also just works, with the only caveat being that your NVidia card will be engaged at all times once you do this, which is not great for your battery life. We are working to improve this, but it will take some time as it both requires us re-architecting some older parts of the stack and get the Nvidia driver updated to support the new solution. We do plan on listing the NVidia driver in GNOME Software soon without having to manually setup the repository, so soon we will have a very smooth experience where the Nvidia driver is just a click in the Software store away for our users.
Another item of interest here for the discerning user is that if you are on the NVidia binary driver you will be using X and not Wayland. The reason for this as I have stated in previous blog posts too is that we still have some major gaps on the Wayland side when it comes to dealing with the binary NVidia driver. Also the general infrastructure for dealing with hybrid graphics under Wayland is not there yet, but we are working on that too.Manjaro KDE на Wayland
The other big item we have for Fedora Workstation 26 is going to be the formal launch of the Fleet Commander project, with a fully functional release and proper website.
We hope to get that set up for next week, so I will blog more about it then.
Configuring Xorg as the default GNOME session
It is a really cool piece of technology which should make deploying Fedora and RHEL in large orgainzations a lot simpler.
We have another one already ordered and we should be bringing in more in the next Months. This means we can finally seriously kick off figuring out the plumbing work and update the userland stack to have full HDR support under Linux for both media creation and consumption.
NVidia driver usage gotcha: the driver needs to be compiled against the current kernel. I upgraded from F25 to F26 and got a kernel panic on boot and a garbled screen known issue on my GTX I guessadding nomodeset fixed the boot, I could then reinstall the NVidia drivers.
Also, the screen you ordered supports a larger color gamut than sRGB — will you be working on bringing better color profile support, too?
Not sure what the best solution is, but e. Not sure what a goog solution would be in Linux land. An extension for Wayland to automatically apply correction according to the profile unless the app says it will do it by itself?
Since I fin d it way better than using my GPU all the time. Bumblebee is basically a hack trying to work around some of the limitations of the stack, so if it works for you then great, but hopefully as we progress we our fixes you can get the functionality it provides in a cleaner and more supportable manner.
This seems like an area where Fedora and GNOME could provide some direction to a problem where upstream is having difficulties. Really glad to hear that smoother Nvidia support is being worked on.
I for one find gaming performance on my Nvidia to be on par with Windows — which is certainly impressive. One small suggestion would be to update the release notes with information on how to disable Nouveau when booting via liveusb to install. F26 rocks! Still using bumblebee on my laptop. I tried the Nvidia driver with F As said, the Nvidia card is on all the time, but curiously some applications only found the internal Intel graphics, e. Surely someone must have thought of doing that long ago?!The code will automatically fall back to Xorg in cases where wayland is unavailable like nvidia.
Using Wayland instead of X gives a much better basis for isolating applications from each other and the system. Systems using certain graphics hw or graphics drivers matrox, qxl may have problems running the Wayland session. In these rare cases, users may have to configure gdm to use X11 although automatic fallback should work most of the time. If we don't manage to close all the feature parity gaps entirely, then users relying on those features may have to choose the Xbased session.
The tasks lists in the Scope section are spread across a number of upstream modules and packages: gtk3, gnome-shell, mutter, libinput, Xorg, gdm. All Rights Reserved. For comments or queries, please contact us.
The Fedora Project is maintained and driven by the community and sponsored by Red Hat. This is a community maintained site. Red Hat is not responsible for content. This page was last edited on 24 Augustat Content is available under Attribution-Share Alike 3.How do I rotate it back? I have gone to display in settings but it doesn't have a rotate option, only options related to screen resolution. Are you using wayland? I had my screen rotate on me and couldn't find any way to rotate it back.
I had to move my laptop around until it got to the right orientation and then hit the lock button. Double-clicking doesn't do anything in the displays control panel and there are no rotation options. In F24 using X, if you click on the monitor, there are rotation options.
Ah you did read that I had attached the tag "fedora25" right? So this question pertains to Fedora 25, wherein the default display server protocol is Wayland, not Xorg.
Yes, I was replying to the comment before mine. Sorry, I could have been more clear about that. I had the same problem as you with no solution. I can't edit the comment now to clarify that Asked: Fedora29 wayland firefox webex screen sharing issue.
The blank screen recording problem on Gnome Wayland. Fedora Cannot re-login after logout. Wayland very slow after last update 4. First time here? Check out the FAQ!
Help Fedora test Wayland!
Ask Your Question.When you login, the session runs on Wayland. All other applications still require the legacy X11 stack, and thus run on XWayland. So we need reports on deficiencies that occur on Wayland but not X If you want to provide developers with useful reports, please read it carefully.
Here are guidelines for which bugs to file in each:. These trackers should only include bugs that occur on Wayland, but not on X Wayland is a display technology that should replace the aging X Fedora Workstation can significantly benefit from that. When using or filing bugs against Wayland, use Fedora 23 or later. We have an alias for both the tracker bugs.
Any ideas? Sylvia: Have you created an account? Bugzilla is working fine.
Sessions on Wayland works, but on low performance — even mouse pointer have lags. Plus — Fedora never care much about working proprietary drivers, so many users will be disappointed with Wayland as default lack of drivers. I use gnome on wayland on and off right now in Fedora Am I alone in still using it? Have you seen the wiki page linked in the article?
I have spent time documenting most common issues. Maybe this has been fixed since you posted, but middle click paste works for me with Wayland Fedora Well, this is all nice, but what annoys me beyond my will to submit bug reports is the fact that i need to open a bugzilla account for a lot of stuff that has bugs.
Now i learned that gnome has its own bugzilla… what about KDE? Where does it end? Maybe a common tool that average Joe could use?
How do you motivate other users, meaning just a user and not an Linux enthusiast, to submit bugs? Not to mention that sometimes is a little tricky to login. Your idea makes sense to me too. I agree it makes sense from user point of view. So at the moment, you can technically file everything into a single place, but if you want to maximize the report usefulness and the likeliness of having your bug fixed, you always need to find the closest upstream available and report it there.
You can file them in the Fedora Redhat bugzilla.
Or the packager will forward the issues upstream if necessary. It can sometimes be better to also file upstream, but it can certainly be a pain to keep track of them all.
I have accounts on several upstream bug trackers.It walks you through the installation of both software and hardware, and covers everything you need to get your NVIDIA card up and running. Open up your desktop case and check the maximum power output printed on your power supply. Further, take a look at your GPU and see if it requires additional wiring, such as a 6-pin connector.
Most entry-level GPUs only draw power directly from the motherboard, but some require extra juice. PSUs are straightforward to replace, but make sure to take note of the wiring layout before detaching your current power supply. Additionally, make sure to select a PSU that fits your desktop case. To calculate the impact of the bottlenecking effect for your machine, click here.
Upgrading your CPU is a potential consideration. Before proceeding, ensure your motherboard is compatible with your GPU of choice. Your graphics card should be inserted into the PCI-E x16 slot closest to the heat-sink. Ensure that your setup contains enough space for the GPU. First, open up a terminal, and update your package-manager if you have not done so alreadyby running:. Next, reboot with the simple command:.
After reboot, install the Fedora 28 workstation repositories:. After the reboot, verify the addition of the repository via the following command:. If not, you may have encountered an error when adding the new repository and you should give it another shot.
Login, connect to the internet, and open the software app. Once this process is complete, close all applications and shut down the computer. Unplug the power supply to your machine.
Then, press the power button once to drain any residual power to protect yourself from electric shock. If your PSU has a power switch, switch it off. Finally, install the graphics card. It should successfully boot up. To ensure the new card is working at capacity, a GPU performance test is needed. GL Mark 2, a benchmarking tool that provides information on buffering, building, lighting, texturing, etc, offers an excellent solution.
GL Mark 2 records frame rates for a variety of different graphical tests, and outputs an overall performance score called the glmark2 score. Note: glxgears will only test the performance of your screen or monitor, not the graphics card itself.
Use GL Mark 2 instead. Assuming the diagnostics look good, enjoy using your new GPU. I'm a student interested in computer science, biotechnology and neuroscience research.
Through my studies in CS and Neuro at Dartmouth I aim to prepare myself for disciplines that fall at the crossroads of computational power and the life sciences. Outside of class, I enjoy coding, running, and working to build a specialty coffee company I founded alongside a good friend. Sometimes, especially in laptops having Optimus power saving, the nouveau driver will fail to load and cause kernel panic.
It is required to blacklist the driver from grub and disable the services that load the nouveau driver to enable GPU switching. Could you please point me out how to switch between GPUs? Maybe some manual? Then these pages can point you in the right directions:.For the past several releases, the Fedora Project has been pursuing what it calls Fedora Next.
Previous Fedora releases also had a "cloud" edition, but with the latest release—Fedora 25, a major update for this Linux distribution—that's been replaced by Fedora Atomic. Fedora Cloud, aside from having a meaningless name, didn't quite pan out. And they can be summed up in a single word: Wayland. Yes, after being pushed back from release after release, Fedora 25 finally defaults to using the Wayland graphics stack assuming you have a supported graphics card.
This is perhaps the biggest change to come in the Linux world since the move to systemd. However, unlike that systemd transition, the switch to Wayland was so seamless I had to logout and double check that I was in fact using Wayland. The biggest change in this release is undoubtedly the move to Wayland as the default, erm protocol, replacing the venerable X Server. Wayland's goal is to be easier to develop and maintain. To a lesser degree, it also aims to get rid of the X's confusing clutter of accumulated bits that have been bolted on over the years.
Wayland is not, strictly speaking, a display server like X. Wayland is a protocol for a compositor to talk through. To make things more confusing the compositor can be a Wayland client itself. It could also be an X application, some input device or a standalone display server.
Wayland doesn't actually do much and that's by design. As the Wayland FAQ puts it, "the compositor sends input events to the clients. The clients render locally and then communicate video memory buffers and information about updates to those buffers back to the compositor.
What's perhaps most remarkable for a change that's so low-level, and in fact one that's taking a lot of X functionality and moving lower down into the stack, is how unlikely you are to notice it. During testing so far encompassing about two weeks of use as I write thisthe transition to Wayland has been totally transparent. It's difficult to describe without seeing it, but little moments of tearing that used to happen under X are gone and common tasks like dragging windows are much smoother.
To be clear there are still plenty of things that don't work with Wayland. In fact there likely will always be legacy system elements that don't know what to make of Wayland and will never be updated. For that situation there's XWayland, which is a plugin for Wayland compositors that runs a real X server inside Wayland. XWayland is a big part of why you're unlikely to notice the move to Wayland. For example, take desktop icons. I've also been unable to find a clipboard manager that works properly under Wayland.
The other problem I've run into is that neither of the tint-shifting applications I use work with Wayland. Neither f.
Judging by posts from around the Web, video playback is sometimes an issue too, though I have not actually experienced this problem.I know many of you have wanted to test running Wayland on NVidia. It is not ready for primetime yet as we are still working on the server side glvnd piece we need for XWayland.
That said with both Adam Jackson looking at this from our side and Kyle Brenneman looking at it from NVidia I am sure we will be able to hash out the remaining open questions and get that done. In the meantime Miguel A.
GUADEC this year should be a lot of fun and from what I hear we are going to have record level attendance this year based early registration numbers, so if you can make it Manchester I strongly recommend joining us as I think this years event will have a lot of energy and a lot of interesting discussions on what the next steps are for GNOME. EGLStreams under Wayland is a bit misleading. The headline just says running Wayland on the NVidia driver which is what the story is about.
The GitHub repository seems abandoned by now….
I installed the wayland mutter in my fedora rawhide with kernenl Built on WordPress. Bad Behavior has blocked access attempts in the last 7 days. Christian F. Thanks for the update! The GitHub repository seems abandoned by now… 8 uraeus on Search Find me on social media Twitter.